Active PoE Splitter Power Over Ethernet 48V to 5V 2.4A Micro USB 4 Raspberry Pi

Description

Active PoE Splitter Power Over Ethernet
Micro USB Plug
for Raspberry Pi B/B+/2/3
48V to 5V 2.4A (Max. 12watt)
Compliant with IEEE802.3af
With 2.5KV isolation
Note:
This POE splitter must be connected with POE Switch or 48V POE Injector so that it can supply power to a connected Raspberry Pi or other Micro USB Port IN DC 5V cameras:
Compatible POE switch and POE ingector links:
48V 0.5A PoE Injector:
https://www.ebay.com/itm/191011392732
Raspberry Pi PoE Kit (Injector+ Splitter)
:
https://www.ebay.com/itm/191962971404
48V 96W 5 Ports 4 PoE Injector Switch:
https://www.ebay.com/itm/191789795402
48V 120W 9 Ports 8 PoE Injector Switch:
https://www.ebay.com/itm/201509599271
IEEE 802.3af/802.3at standard POE switches(safty power supply):
DSLRKIT 96watt 5 Port 4 802.3af/at Internal Power PoE Switch:
https://www.ebay.com/itm/191902466234
9 Ports 8 PoE 130Watt IEEE802.3at/af Switch :
https://www.ebay.com/itm/191888559318
8 PoE 1 Gigabit and 1 SFP PoE Switch 120W IEEE802.3af:
https://www.ebay.com/itm/191695174592
Note:
this POE Splitter is also suitable for household IP camera and mobile router with Micro USB Plug 5V power Port.
Power Output Port:
Micro USB Power Plug
Buy more with discount:
4pcs Active PoE Splitter Power Over Ethernet 48V to 5V 2.4A Micro USB Port
N
ote:
When using 80.3af/802.3at standard PoE switch (or injector) to connect this PoE splitter,and the Power Output Port (Micro USB) is not loaded (unconnected device),the PoE splitter will enter standby mode. Data Output Port (RJ45 Male) will not work at this moment.
To avoid this problem,please use 48V (or 52V) Unsolicited PoE Switch (or Injector), links are below:
https://www.ebay.com/itm/191011392732
https://www.ebay.com/itm/192162843421
https://www.ebay.com/itm/201897338202
https://www.ebay.com/itm/192134808637
https://www.ebay.com/itm/191789795402
https://www.ebay.com/itm/201509599271
RJ45 female INPUT Port:
Support the IEEE 802.3af the Power over Ethernet PoE Switch
Support 48V Unsolicited Power Over Ethernet PoE Switch
Support 48V Unsolicited Power Over Ethernet PoE Adapter
Specification:
Compliant with IEEE802.3af
Isolation: 2.5kV
Power Input:  DC44~57V
Power Output: DC5V 2.4A
Data&Power INPUT Port: from RJ45 female (Compliant with IEEE802.3af/at PoE)
Data Output Port: RJ45 Male
Power Output Port:
Micro USB Power Plug
Data Transfer Rate:  10/100Mbps
Devices will be detected before poe input
Power Pin:support both 1/2(+/-),3/6(-/+) or 4/5(+),7/8(-)
Body size: 80 x 27x 22 mm
DC cable length：165mm
RJ45 Modular Plug cable length：155mm
Weight : 55g
Operation Temperatue:-20
℃ ~ 45℃
Storage Temperature:-
30℃ ~ 70℃
Notice:
Some managed intelligent Gigabit PoE switches need to set the LAN port of this connected splitter
to Manual 100Mb/s mode in the management Settings of switches,
otherwise the power supply may work normally but the network connection will not work,
such as the following switch,
HP 3500-48G-PoE yl Switch (J8693A)
Notice:
Yellow LED(power) will be light up when micro USB connects to the device.
Green LED(data) never light in any circumstances,two reasons are below,
1.
This splitter allows data to input and output through its RJ45 port, but no indicator on this splitter indicates the status of the data transfer. Only one power indicator shows the working status of the POE.
2.due to the cost problem,the network interface component is from the universal components which own two LEDs on the market.
Item Included:
48V to 5V Active PoE Splitter(Micro USB Power Plug) x1