(2) Rockville DPM10B 10" 800w Active Studio Monitors+Headphones+Mic+Shield+Boom

Description

Car Audio & Video
Pro Audio
Marine Audio
Lighting
Karaoke
Home/Portable Audio
Package: (2) Rockville DPM10B 10" 800 Watt 3-Way Powered Studio Monitors + Rockville PRO-M50 Studio Headphones+Detachable Coil Cable+Case+Extra Ear Pad + Rockville RCM03 Pro Studio Recording Condenser Microphone Mic With High Quality Metal Construction and Shock Mount + (1) Rockville ROCKSHIELD 3 Large Studio Mic Isolation Shield with Sound Dampening Foam with Sound Dampening Foam + Samson MD5 Desktop Mic Stand w/ Weighted Base for Recording, Studio, Podcasting + Rockville DMS40 40" Microphone Boom Arm Studio Podcast USB Mic Stand with Desk Clamp
Click Thumbnails to Enlarge
Condition and Warranty
Condition:
BRAND NEW IN ORIGINAL PACKAGING
Warranty:
1 YEAR AUDIOSAVINGS
Product Description
Package Includes:
(1) Rockville DPM10B 10" 400w Powered Active 3-Way Studio Monitor Speaker Full Range
(1) Rockville PRO-M50 Studio Headphones+Detachable Coil Cable+Case+Extra Ear Pad
(1) Rockville RCM03 Pro Studio Recording Condenser Microphone Mic+Metal Shock Mount
(1) Rockville ROCKSHIELD 3 Large Studio Mic Isolation Shield with Sound Dampening Foam
(1) Samson MD5 Desktop Mic Stand w/ Weighted Base for Recording, Studio, Podcasting
(1) Rockville DMS40 40" Microphone Boom Arm Studio Podcast USB Mic Stand+Desk Clamp
How to Set Up your DPM Series Speakers:
Video of DPM10B:
The DPM10B by Rockville is one of the only 10” studio monitors on the market. There is only one other that we have seen. We strongly feel out of the few on the market that ours is the best sounding and best quality.
They have a flat frequency curve making these the perfect studio monitors, but many customers also use these in their home or as stage monitors. These are just about the cleanest sounding speakers you can find. The only reason our price point is not 300 % higher is because you are buying directly from the manufacturer.
To get the most efficiency we use a tri-amp class “AB” amplifier. There are 3 separate amps built into this speaker. One for the lows, one for the mids, and one for the highs. We also added a 3-way crossover that makes sure each component is playing the proper frequencies so that you get the cleanest sound. This is a true 3-way speaker design. We use the best quality components from the amp circuit, to the tweeter, to the woofer, to the enclosure.  For highs, we use Ferro fluid enhanced 1.5" neodymium silk dome tweeters. The neo magnet is strong and can handle a lot of heat. This enabled us to beef up the amplifier power without having to worry about melting or blowing the tweeter. The highs on these sound phenomenal! For mids we use a 4” glass Aramid composite midrange. The voice and mids on this speaker are what makes this cleaner than anything else I have ever listened to. The 10” glass Aramid composite woofer gives you some serious bass! What I love about the bass is that you do not get any rumbling effect. It is just clean and musical. The rubber surrounds increase sound quality and eliminate unwanted distortion. The specially wound voice coils produce accurate responses along the entire frequency spectrum. We developed these speakers with the most optimized magnet structure, cone, and cabinet space, with the goal of reproducing the sound to play back exactly the way it was recorded!
Features:
Rockville DPM10B 10" 3-Way 400W Active/Powered Studio Monitor Speaker in Black (sold individually)
Peak Power: 400 Watt
RMS Power: 200 Watt
True 3-way design With Tri-Amped:  40 Watts for highs, 40 Watts for Mids, and 120 watts for the lows. This speaker has 3 amps built in. It has a separate amp for the lows, mids, and highs. This technology creates the most crisp and clear sound imaginable
3-Way Crossover system – Our 3 way crossover built-in is tuned to make sure each speaker plays the proper frequencies. We filter out unwanted sounds from each speaker, and create a flattened frequency curve for the ultimate true sound reproduction
Midfield monitor with the optimal operating distance of 3 feet to -14 feet
The front-firing port is built to the perfect spec to enhance the sound and keep a very flat frequency curve
Curved Front Bezel Design Eliminates Standing Wave Distortion
Enclosure is made of top quality high-grade MDF wood. The enclosure is 0.5” thick around while the front board of it is a full 1” thick to give you the ultimate best sound quality!
Tweeter Waveguide design optimizes directivity and phase response providing amazing detail and imaging
Ferro Fluid Enhanced 1.5" Neodymium Silk Dome Tweeter. Our tweeter produces the softest most realistic highs on the market that will not hurt your ears. They are loud, clear, and musical
Tweeter has 1” voice coil diameter
10” Glass Aramid Composite Woofer cone for excellent transient response and accurate low and mid sound reproduction
4” Glass Aramid Composite Midrange for extremely accurate midrange and vocal sound reproduction
Volume Control: System gain range from -30 dB to +6 dB,
High Frequency adjusts -2dB, -1dB, 0, +1dB
Balanced XLR and ¼” TRS line inputs and unbalanced RCA inputs
The enclosure is built with the perfect amount of air space to maximize sound quality for a studio
Thermal and Overload / Clip Protection protects the speaker from getting damaged
Rubber woofer surrounds increase sound quality and eliminate unwanted distortion
Specially Wound Voice Coils Produce Accurate Responses along Entire Frequency Spectrum
Round edges and trimmed front wooden front board give you a modern beautiful looking speaker
Front panel built with black real anodizing aluminum
Distortion-Free Playback Even at Max Volume Listening! Very Clean Sound!
Our factory uses the latest Precision Glue Machine (Over 500 meter Tunnel Oven). The glue on the speakers is of the upmost importance. If the glue does not hold up, the speaker is done. We use the latest machinery to manufacture these speakers. The SPL of the speaker goes up when you use better glue and a better machine the secure the glue in place
Thick “Wadding” protects inside the speaker cabinet – Wadding is a white chemical silk type of material that we put inside the speaker cabinet for multiple reasons. It helps to make the sound come out more clear, and it also protects all the parts inside the speaker. This material is also fire retardant.
World class top of the line audiophile grade components! We use 3 Amplifier IC’s made by a famous manufacturer called ST. The model is TDA7294. These are known to be best- in-class circuit designs. There are 3 of them since we have 3 amps in the speaker (one for lows, one for mids, one for highs)
110/220 Volt compatible
Every speaker in production undergoes a computer generated sound check test to ensure it upholds to our specifications and standards
We use a “6Sigma” style Quality Assurance of Each Product (Long story short, each product will work perfectly as advertised for a long long time!)
Specifications:
Certification: CE and RoHS Compliant
Amplifier: Class AB, tri-amped
Max SPL: 113dB at 1w/1m
THD: 0.10%
Frequency Response: 31Hz - 20kHz
Peak output: 400 Watts
RMS output:  200 Watt
Input voltage: 120V
Components: 1.5" neodymium silk dome tweeter, 4” Midrange and 8" woofer with rubber surrounds and glass aramid fiber cone
Includes power cord, user manual, warranty, and speaker
Input Impedance (Ohms): 10 K Ohm Balanced
System Volume: (-30dB to +6dB)
Product Dimensions in Inches (Single): (W*H*D) 12.8” x 21. 5'' x 14.4''
Shipping Dimensions in Inches: (W*H*D) 16.3 x 25'' x 17.9''
Net Weight: 39.7 LBS
Shipping Weight: 44.5 LBS
Video of RCM03:
Unboxing Video of RCM03:
The Rockville RCM03 condenser microphone performs better than famous branded microphones that cost over 0. This model is similar to our RCM01 however it is made of aluminum, and the frame is slightly larger. We also upgraded this model to a high end metal anti-wind cap! We highly recommend this design. This model is an amazing upgrade to our top selling RCM01 model!
Multi-Purpose
Designed for crystal clear capturing of vocals, acoustic and amplified instruments, as well as room reverb. The frequency pick up pattern makes the RCM03 amazing in studio applications.
The aluminum construction makes the RCM03 tough enough for Live sound applications as well!
Multiple connection options!
This microphone can be used in multiple ways. You can connect this to the phantom power of your mixer or you can connect it directly to your computer sound card. We include both cables! We include a cable to connect it to your mixer as well as a cable to connect the mic to your computer!
Quality built inside and out!
The microphone is made of aluminum. It is very rugged and tough like you would expect from any Rockville product. This microphone has a large diaphragm which is what enables our mic to deliver a wider range of high and low frequencies than our competitors. Our frequency range is tested at 30HZ – 20KHZ!  The mic sounds crystal clear sound with no distortion!
The PCB (circuit board) uses surface mounted components which is the same method the expensive brands use. We use only top components that under-go extreme testing by our own audio engineers.
The last thing that I need to mention and call out is that our product is very sturdy. Let me explain. When you are recording, you do not want even the slightest noises coming from your mic. The microphone consists of a casing and there is a cartridge inside the case. You do not want that cartridge moving around. We made sure to adjust our mechanism and ensure the cartridge is firmly in place and not creating any unwanted noises.
Best Value
After testing our Rockville condenser mics against mics that cost 300% more money, we found ours to be as good or better than the ones we tested against.
What's Included:
RCM03 Condenser Microphone (made of aluminum!)
100% Copper 10 foot 3.5mm jack to XLR cable to connect mic to your computer or other device
100% Copper 10 foot XLR to XLR cable to connect to any mixer with phantom power
Metal shock mount
Metal Anti-wind foam cap
Owners Manual
Warranty card
Features:
Rockville RCM03 Pro Studio Recording Condenser Microphone Mic+Metal Shock Mount
Aluminum high quality construction
Polar Pattern: Internally Polarized Condenser Cardioid Design
Large diaphragm for smooth, natural sound and low noise
Power Requirements: 48V DC phantom power or computer sound card (can connect to the phantom power channel of your mixer or can connect to your laptop or computer)
Uni-directional
Sensitivity: -27dB±2dB(0dB=1V/Pa at1kHZ)
Output impedance: 200Ω±30%(at 1kHz)
Standard operating voltage: 3V
Operating voltage range: 1.5V-10V
Current consumption: less than 500uA
Voltage deduction characteristic: within 3dB at 2V
S/N ratio: More than 24dB
Frequency Response: 30Hz - 20 KHz
Fixed Crossover Filter cutoff frequency: 40Hz---16 KHz
Load impedance: Greater or = to 1000 Ohms
Equivalent Noise level: Less than 18dB A (IEC581-5)
Max. Input SPL: 126dB(THD≤1.0% at 1kHZ)
Electrical current: Greater than 4.8Ma
Microphone body net weight:320 Grams (0.7 Pounds)
Microphone Max.diameter 44mm (1.73” inches)
Microphone Length 217mm (8.54” inches)
Microphone material: steel grille + Alluminum (handheld part)
PCB Layout: Surface mount
Owner’s Manual
How to Set Up DMS40:
Video of DMS40:
The Rockville DMS40 desktop microphone boom arm is the perfect accessory for any podcast, home studio setup, or broadcasting studio. Its rotating design provides a maximum arm reach of 40" giving you freedom to place your mic anywhere you want!
Our designers used the most sturdy and long lasting clamps and springs, with durable steel construction.
Features:
Rockville DMS40 40" Studio Desk Clamp Microphone Stand w/Boom Arm
Articulating microphone boom arm
Suitable for studios, broadcasting, podcasting, and more
Arms: 20"+20" arm length for adjustment
C-shape desk clamp is made of aluminum alloy
Fits any desk less than 2 inch thick
ABS plastic mic clip
You can set the base of the stand on the desk firmly and adjust to your favorite position
High quality steel frame is sturdy and durable
Internal springs for silent and effortless positioning
Authorized Samson Dealer!
Description:
Samson's MD5 Desktop Microphone Stand is the ideal tool for any home studio. The MD5 is slim enough to fit on your desk, but also contains a weighted metal base to ensure guaranteed stability and compatibility with any microphone you prefer no matter its size or weight. It's perfect for podcasts, voiceovers, recording music or any other application where high-quality audio is essential. Easy setup and sturdy components make the Samson's MD5 the essential accessory for your desktop studio.
Features:
Samson MD5 Desktop Mic Stand w/ Weighted Base for Recording, Studio, Podcasting
Perfect for podcasts, voiceovers, recording vocals, and more!
5" desktop microphone stand
Designed to hold any standard mic for desktop
Weighted metal base for total stability
Compatible with Samson's SP01 shockmount
How to Set Up Your RockShield 3:
Video of ROCKSHIELD 3:
Includes:
5 Panel Mic Isolation Shield
Hardware to Mount unit to your mic stand
5/8” Mic Adapter
Desktop mic attachment
RockShield 3
Rockville’s Rockshield 3 studio microphone isolation shield is the latest addition to our ever growing line of Pro Audio studio accessories. Featuring 2-inch-thick high density acoustic foam, the RockShield 3 keeps unwanted outside audio waves and vibrations from affecting your recordings. By creating an acoustic boundary around the microphone, vocal audio flow is improved. Your voice is redirected to the microphone, meanwhile room reflections are prevented from directly entering the recording area. The end result is you will achieve a crisper and cleaner sound. This shield can be mounted to compatible microphone stands or used in a fixed location, like a countertop/tabletop. Easy installation and studio quality performance will quickly make the Rockshield 3 your go-to sound dampening isolation shield.
Features:
RockShield 3 Pro Audio Acoustic Microphone Isolation Shield
Keeps Excessive Room Ambience and Off Axis Sound from interfering with your microphone when recording acoustic and vocal tracks
Isolates Directional Microphones from Off Axis Coloration
Limits External Bleed from Unintended Sound Sources
Features a 2-Inch-Thick High Density Pyramid Acoustic Foam front and a vented metal back plate for the Best Noise Reflection Reduction
Can be used in fixed location
Stand mountable
Provides Vocal Booth Style Recordings with Minimal Footprint
Professional Studio-Grade
Rugged Finish Makes This Easy to Transport
Tri-Pod Foot Design for Stability on Flat Surfaces
3/8 Die-Cast Metal Threads
Mic Stand with 5/8 Adapter
The shield is made of pure high-grade steel
Number of Panels: 5 pcs
Dimensions Each Panel: 6.3'' x 12.2'' inch
Dimensions Assembled Unit: 17.5'' x 16.1'' x 7'' inch
Owner’s Manual
Video of PRO-M50:
Rockville brings you studio quality headphones and at an incredible price with its new PRO-M50 headphones. These are professional grade headphones that are guaranteed to ourperform headphones that cost triple the price! These feature ergonomically designed swiveling cups with interchangeable soft suede or leather finish cushions (included). The ear cups seal tight for excellent sound isolation and minimal bleed. Inside these cups you’ll find 40mm Neodymium drivers delivering accurate audio with an extended frequency range for clear and rich bass, and a full frequency range of mids and highs. These are closed back style headphones specifically designed for studio monitoring. These play back the sound with a flat frequency curve so you can hear your music exactly how it was recorded. With the PRO-M50 you can expect to hear every detail of every song with extreme accuracy. These headphones cover full frequency ranges; even extending a bit past the frequencies that the human ear can hear.
The headband is made of soft leather, offering ultimate comfort even after extended wear. The beautifully designed stainless steel headband frame and arms are strong and durable. A detachable 51” coiled 100% Oxygen Free Copper cable with a gold plated 3.5mm plug is included along with a gold plated
¼”
adapter to ensure the best possible signal. A hard leather case is included to store and protect your new investment when you are on the go.
Amazing sound quality will make these your go-to headphones whether in the studio or out and about!
Features:
Rockville PRO-M50 Studio Headphones w/ Detachable Coil Cable, Case+Extra Ear Pad
Professional High-Definition Studio Headphones
40mm Neodymium drivers
Ergonomically designed swivel ear cups
Supreme sound isolation
Accurate sound reproduction
Minimal bleed
Sturdy and durable steel headband and arms
Soft leather headband cover
Interchangeable leather and soft suede ear cups covers included
Detachable 51” coil cable made of 100% Oxygen Free Copper (158” fully extended)
Gold plated 3.5mm connector
Gold plated ¼” adapter
Hard leather carrying case
Stainless steel headband frame and moving arms are durable and long-lasting
Specifications:
Style: Closed-Back
Design: Circumaural
Transducer Type: Dynamic
Driver: 40MM
Sensitivity: 97±3dB
Impedance: 32ohm
Frequency Response:10Hz – 25KHz
Max. Power: 600MW
Rating Power: 260MW
Net Weight:290g (with cable)
Return Policy
AudioSavings Return Policy:
At Audiosavings, we strongly believe in customer satisfaction and therefore offer free return shipping within 30 days of purchase on all items returned to us within the continental USA.
Prior to returning merchandise, contact us and we will give you a return authorization # and a return label.
You may return this item for a refund within 30 DAYS of purchase.
Warranty Repair/Exchange Period: 1 YEAR
If your item is defective or you want to return it for any reason within the first 30 days of when it was delivered to you; you have the following options:
We will send you a
pre-paid shipping label
to replace the item for a brand new one.
We will send you a
pre-paid shipping label
to exchange the item for another item of your choice. If the item you chose is more or less money we will work out the price difference with you.
If you are returning a
working item
in used condition for a refund there will be a 20% used item fee deducted from your refund. All replacements and exchanges are free.
Replacement/Processing Time:
Your replacement or refund will process within 3-5 business days of when we receive the item.
Please note
items with physical damage un-related to shipping are not covered under warranty. Registered software cannot be returned.
You
MUST notify us within 48 hours
if you receive an item that was damaged during shipping.
Process for returning items
Please email us with your eBay user ID, Item code / model #, Condition of the item, and the reason for your return. Please also indicate whether you would like a replacement, an exchange, or a refund. We will supply you with a reference number (RMA #) to put on the package which will ensure quick processing of your return.
All returns require a RMA# to be returned back to our facility.
Item Code: (2)DPM10B+PRO-M50+RCM03+RMF1+SAMD5+DMS40
Home
/
About Us
/
Contact Us
/
Returns
/
FAQ's
Copyright © 2016
Audio Savings
, All rights reserved.  |
eBay Template Design